6CH 2A Leading Edge Dimming Actuator supports AC220V and AC110V power input. It has 6 output channels (2CH 6A / 4CH 3A / 6CH 2A) and each channel has a bypass button for manual control. Fuse protection is available for each channel, so that the dimmer will be protected in case of short circuit. LED indicators are available for indicating whether a short circuit occurs in the channel.

■ Buspro cable – CAT5E or dedicated HDL Buspro cable
■ Buspro connection – Series connection (hand-in-hand recommended)
■ The PE terminal should be connected.
■ Two types of power input can be chosen via HDL Buspro Setup Tool 2: 220V AC or 110V AC.
■ Connection checking – Check all connections after installation
■ Output channel – The current of each channel can not exceed 2A.
■ Fuse – Cut off the power of the dimmer when replace the fuse. The fuse to replace the broken one must be of the same type (aR type).
■ Load types – Incandescent light, halogen light, low-voltage halogen light, LED light, etc. The loads must be suitable for leading edge dimming.
■ Make sure the working temperature of the dimmer does not exceed 45℃.